Our products

Albin Peristaltic Hose Pump

Pumping solutions for industries

Albin Pump develops and markets pump solutions for industries in order to create better products and production processes

Our pumps are available in different sizes that provide flow rates of 0 to 200 m3/h

Since only the inside of the hose and hose inserts are in contact with the fluid, aggressive and contaminated fluids can be processed without the damage experienced by other pumping technologies. Hoses are constructed of natural rubber, NBR, NBR FDA, EPDM and Hypalon

The assets of our products

Our pumps :

  • Will handle fragile fluids with little wear
  • Provide high levels of volumetric accuracy for sampling and metering applications.
  • Ability to pass solids in the material being pumped, 20% of hose ID
  • Dry-run capability allows tank and line stripping.
  • Seal-less design eliminates leaks, contamination and wear problems associated with difficult to seal products.
  • Self-priming up to 9.80 meters.
  • Reversible operation that allows pumping in both directions.
  • Low maintenance requirements of the hose and shoes.

Albin Pump data sheets

Albin Pump ALH, The Latest Design in Hose Pumps

We have combined the best available materials with smart design solutions in order to maximize running time and minimize maintenance. Two shoes mounted at 180° on a rotating wheel compress a reinforced rubber hose that contains a fluid to be pumped. The compression of the hose by the rotating shoes creates continuous suction at the inlet of the pump and pushes the fluid to the outlet of the pump. The pump casing contains a lubricant that reduces friction and ensures the best pump performance with minimum maintenance.  The pumped liquid is in contact with only the interior of the rubber hose, thus permitting the pumping of a wide variety of reactive fluids. This pump summarizes what we at ALBIN PUMP want to achieve: better Pump Solutions for our customers. Our design enhances the pump’s simplicity and robust principle.

Albin Pump ALX 150, The Extra Hose Pumps

Albin Pump SAS with our ALX Series pump you get all the benefits of other peristaltic pumps, with the two key additional benefits of a much slower speed for a given flowrate; and rotating rollers for soft hose compression. These two features greatly increase hose life & reduce power consumption.

The ALX150 pump has the biggest flow of peristaltic pumps in the World.

After years of development the ALX150 was introduced for applications ranging from; sea tanker overloading, to high solids thickener underflow slurry transfer, where fast reliable offloading is key to process profitability.

Our pump uses soft action rotating rollers to compress the hose instead of hard fixed shoes. The advantage of our rollers is that they gently rotate as they compress the hose, losing very little power from surface friction. The pumps soft rollers reduce power consumption dramatically. Displacing 90 litres per revolution you can run this pump very slowly to deliver high flowrates up to 200 m3/h with excellent hose life.

ALP, Reduce Maintenance Downtime

Suitable for pumping and dosing low or high viscous, pasty, pure, neutral, aggressive, or abrasive liquids, those containing gases or which tend to froth.

Good for those containing solids in the following industries: Paint, dairy and beverage, meat and fish processing, pharmaceutical and cosmetics, waste water and water treatment, chemical and petrochemical industries, pulp and paper, textile, soap and fats, building, ceramics.

AD Albin Pump

Albin pump has developed and patented a revolutionary AODD pump.

Compared to traditional AODD pumps, the AD pump offers 70% lower pulsation, a reduction in energy consumption of up to 45%, noise reduction, three to five times longer operation time between service intervals and an increase in diaphragm lifetime by up to five times. The AD pump is available in 4 sizes with a flow rate from 0-130 l/min.

The advantages of the AD Albin Pump

  • Revolutionising air valve design and central flow technique
  • Less pulsation (-70%)
  • Lower air consumption (-35%)
  • Lower maintenance costs
  • Longer diaphragm lifetime (3-5 times)
  • Compact design and low weight
  • Total flexibility in installation – easy to integrate
  • Easy service – less downtime – lower lifecycle cost
  • More cost-effective solutions for both OEM manufacturers and end user

MG Albin Pump

The ALBIN PUMP MG pump allows the transfer of viscous and fibrous products, polymeres, latex,slurries,
sludges, pastes and muds also containing abrasive and suspended solids with a maximum size of 30 mm.

These volumetric pumps have two lobes rotating in opposite directions, trapping the liquid in the volume remaining between them and the pump body. The direction of the liquid being dependent on the direction of rotation of the lobes. This technology offers a range of pumps allowing a flow ranging from 1.4 to 310 m3 / h.